How to Hack MyBro DV-235T to Work With Globe Network Using Wimax Tool 3.0

Hack your MyBro DV-235T for it to work on Globe Network using Wimax Tol 3.0 by yyyxyyyz

Requirements: 

1.) MyBro DV-235T version: v2.10.14-g1.0.7-gp or lower.
To check for your firmware version login to your MyBro Web GUI. You can find the version # at the upper left side of the Web GUI. 

2.) IMPORTANT: You must have an admin rights to your wimax to proceed to the next step. (For Win 7 and 8 You must have your telnet enabled to do this: Just search google )
Let's change the default telnet username and password to admin, admin

On your PC open RUN > and type telnet 192.168.15.1 (FOR v6 or v7) OR 10.1.1.254 (FOR v4 or v5)
login: mt7109 pass: wimax (type nyo lang kahit walang lumalabas)  
sncfg dset ADMIN_NAME admin  
sncfg dset ADMIN_PASSWD '$1$k2I9hJe4$SJmLvrUF2capJaeJh4.nI0'  
sncfg commit /factoryreset.sh

The default IP:

• 192.168.15.1 
• ( GUI user: smart password: smart  || telnet user: admin password: admin ) for v7 and v6
• 10.1.1.254 
• (GUI user: admin password: admin || telnet user: admin password: admin) for lower versions v5 and v4.

3.) Wimax Tool 3.0 by yyyxyyyz

4.) A working Globe Wimax Mac Address. If you have none, you can request it here. 

Procedure:

1.) Connect you MyBro wimax to your PC via LAN Cable

2.) Open the Wimax Tool 3.0 by yyyxyyyz (Please read the readme.txt on how to operate this tool)

3.) Now click Tool Setting > Select DV235T Globe > click Load Default (Now you can set the telnet username, pass and address based on your device version) and lastly, click Save Settings to save the changes.

4.) Click the MAC Changer tab and paste a valid/working Globe Wimax Mac Address 

5.) Now, click the Change MAC button and wait for your device to reboot

6.) After the reboot, you will notice that you are still not connected to the Internet because the default frequency of MyBro is of Smart. So what will you do is click the Frequency List Box and select ALL-G khz and finally, click the Set Device Frequency button.

7.) Wait for the device to scan for a working frequency and once it connects, congrats! you have successfully hacked your MyBro device to work with Globe Network.

Screenshots will be uploaded soon......

Please bookmark this site for more future updates. Such as:

1.) How to snipe live mac address using DV-235T
2.) How to protect you MyBro device from remote hacking
3.) How to repair your DV-235T